To determine the load-carrying, wear, and extreme pressure characteristics of gear lubricants, a test axle is operated under low-speed, high-torque conditions. The axle is then disassembled and rated for rust. To determine the corrosion prevention properties of gear lubricants, an axle is filled with test lubricant and distilled water and operated for four hours at 2,500 rpm and 180☏, then soaked for 162 hours at 51☌ (125☏). L-33-1 Moisture Corrosion Test (ASTM D7038) Numerous other test procedures for the lubricant and additive industries may be conducted, as well as custom programs tailored to clients’ individual needs. Required bench and performance tests are conducted to qualify automotive gear lubricants under various specifications. Manual Transmission and Rear Axle Gear Lubricant Performance Testing At SwRI, we conduct a number of transmission fluids testing for both ATFs and MTFs. Transmission oil is critical to keep gears lubricated. There are two types of transmission fluids: automatic transmission fluids (ATF) and manual transmission fluids (MTF). When used in tandem with the Power Management Module (PMM) starter kit, individual PMMs can be use to intelligently manage up to four more additional loads.Manual transmission and dry clutch transmission (dDCT) fluid testing is used to test and evaluate manual transmission fluids.
Through the use of Digital Power Management technology (DPM), each of these switches has the capability to truly manage two air conditioning loads with no additional hardware. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. This 200 amp, open transition, service rated automatic transfer switch is housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied and baked powder paint.
Generac Smart Switches are designed for use with single phase 120/240V generators that utilize an Evolution Controller. This advanced power management technology is standard, unlike competitive models that require additional hardware and investment to add a power management option. Engineered with Generac’s patented Digital Power Management (DPM) technology, it allows for more coverage with a smaller generator through smart load management. The Generac Smart Switch is the most intelligent transfer switch on the market. *For Whole House, Homes with a 200Amp Main Breaker Service, this ATS has the required Service Entrance Disconnect included RXSW200A3 Load Shed ATS replaces the RTSW200A3, RTSY200A3 and RTST200A3
0 kommentar(er)
